鋁卷廣泛用于家具：冰箱，空調，車廂，平臺，包裝管，篩網框架，各種懸掛梁，桌腿，裝飾條，手柄，電線槽和蓋，椅子管等。那鋁卷表面劃傷能刨光處理嗎？下面鋁卷生產廠家為您解答。
Aluminum coils are widely used in furniture: refrigerators, air conditioners, carriages, platforms, packaging tubes, screen frames, various suspension beams, table legs, decorative strips, handles, wireways and covers, chair tubes, etc. Can the scratches on the surface of the aluminum roll be planed? The aluminum coil manufacturer will answer for you.
鋁卷的表面處理是陽極氧化和化學氧化。其中，有一種自然導電氧化處理，附著層是鋁合金的原始顏色?？梢蕴幚韷杭y鋁絕緣輥的表面劃痕。簡而言之，有兩種方法：物理方法和化學方法。
The surface treatment of aluminum coil is anodic oxidation and chemical oxidation. Among them, there is a natural conductive oxidation treatment, and the adhesive layer is the original color of aluminum alloy. It can handle the surface scratches of embossed aluminum insulating roll. In short, there are two methods: physical method and chemical method.
1.物理方法是機械拋光，特別是噴砂，拉絲等。此方法通常用于更深的劃痕。
1. The physical method is mechanical polishing, especially sand blasting, wire drawing, etc. This method is usually used for deeper scratches.
2.化學方法一般使用化學試劑進行拋光。用來腐蝕鋁的表面。
2. Chemical methods generally use chemical reagents for polishing. Used to corrode the surface of aluminum.

化學拋光后，鋁卷表面較輕的劃痕可以完全拋光。消除化學拋光材料的表面，使之明亮美觀。通常兩種方式并用，鋁材表面就可以達到很好的裝飾效果。如果只想使表面光澤保持一致，還可以考慮使用振動拋光（有一臺特殊的振動拋光機），類似于鍋?zhàn)?，將研磨劑放入其中，將產品放入，振動，使產品摩擦研磨和拋光表面。對常規鋁卷來說是可行的，關鍵是低成本。
After chemical polishing, the light scratches on the surface of the aluminum coil can be completely polished. Eliminate the surface of chemical polishing material to make it bright and beautiful. Generally, the two methods can be used together to achieve a good decorative effect on the aluminum surface. If you only want to keep the surface gloss consistent, you can also consider using vibration polishing (there is a special vibration polishing machine), which is similar to a pot. Put the abrasive into it, put the product into it, and vibrate it to make the product rub, grind and polish the surface. It is feasible for conventional aluminum coil, and the key is low cost.
為了避免鋁卷表面出現過多的劃傷，可以怎么預防呢？鋁卷表面敷保護膜，可以很好的避免運輸中的靜電擊傷和加工中的劃傷；鋁卷之間夾紙，這樣運輸中也可以避免鋁卷之間的摩擦。
In order to avoid excessive scratches on the surface of aluminum coil, how can we prevent them? The surface of aluminum coil is coated with protective film, which can effectively avoid electrostatic injury during transportation and scratch during processing; Paper is sandwiched between aluminum coils, so that friction between aluminum coils can also be avoided during transportation.
特別是當我們使用有圖案的鋁卷時，會有殘留的污漬。這對于日常生活中鋁卷的維護非常重要。你可以用清水或相應的去污劑來清洗。當污漬面積變得越來越大時，須小心不要讓它腐蝕鋁卷。更多相關內容就來我們網站http://www.86028744.cn咨詢吧！
Especially when we use aluminum rolls with patterns, there will be residual stains. This is very important for the maintenance of aluminum coils in daily life. You can clean it with clean water or corresponding detergent. When the stain area becomes larger and larger, be careful not to let it corrode the aluminum coil. Come to our website for more relevant content http://www.86028744.cn Ask!